You are here

Publications

Journal and Conference Papers:

  • Clelland, N.L., Seidt, J.D., Daroz, L.G., McGlumphy, E.A., “Comparison of Strains for Splinted and Non-Splinted Implant Prostheses using 3D Image Correlation Photogrammetry”, International Journal of Oral & Maxillofacial Implants, In Press.
  • Gilat, A., Seidt, J.D., “Dynamic Punch Test”, Proceedings of the 9thInternational Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Brussels, Belgium, September, 2009.
  • Gilat, A., Seidt, J.D., “Dynamic Punch Testing of 2024-T351 Aluminum”, Proceedings of the 16th Biennial International conference of the APS Topical Group on Shock Compression of Condensed Matter, Nashville, TN, June/July, 2009.
  • Gilat, A., Schmidt, T.E., Walker, A.L., "Full Field Strain Measurement in Compression and Tensile Split Hopkinson Bar Experiments", Experimental Mechanics, Vol. 49, No. 2, 2009, pp291-302.
  • Seidt, J.D., Gilat, A., “Experimental Investigation of the Failure Characteristics of 2024-T351 Aluminum”, Proceedings of the 2009 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Albuquerque, NM, June, 2009.
  • Kokkonen, J.; Kuokkala, V.-T.; Seidt, J.D.; Walker, A.; Gilat, A.; Olejnik, L.; Rosochowski, A.; “High Strain Rate Deformation Analysis of UFG Aluminum Sheet Samples”; Proceedings of the 2009 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Albuquerque, NM, June, 2009.
  • Seidt, J.D.; Gilat, A.; “Characterization of 2024-T351 Aluminum for Dynamic Loading Applications”, Proceedings of the 11th International Congress and Exhibition on Experimental and Applied Mechanics, Orlando, FL, June, 2008.
  • Gilat, A., Goldberg, R.K., Roberts, G.D., "Strain Rate Sensitivity of Epoxy Resin in Tensile and Shear Loading", Journal of Aerospace Engineering, Vol. 20, No. 2, 2007, pp75-89.
  • Seidt, J.D., Gilat, A., Klein, J.A., Leach, J.R., “High Strain Rate, High Temperature Constitutive and Failure Models for EOD Impact Scenarios”, Proceedings of the 2007 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Springfield, MA, June, 2007.
  • Goldberg, R.K., Roberts, G.D., Gilat A., "Incorporation of the Effects of Temperature and Unloading into the Strain Rate Dependent Analysis of Polymer Matrix Materials Utilizing a State Variable Approach", Earth and Space 2006 - Proceedings of the 10th Biennial International Conference on Engineering, Construction, and Operations in Challenging Environments, 2006.
  • Goldberg, R.K., Roberts, G.D., Gilat A., "Implementation of an associative flow rule including hydrostatic stress effects into the high strain rate deformation analysis of polymer matrix composites", Journal of Aerospace Engineering, Vol. 18, No. 1, 2005, pp18-27.
  • Goldberg, R.K., Roberts, G.D., Gilat A., "Analytical Studies of the High Strain Rate Tensile Response of a Polymer Matrix Composite", Journal of Advanced Materials, Vol. 36, No. 3, 2004, pp14-24.
  • Goldberg, R.K., Roberts, G.D., Gilat A., "Incorporation of Mean Stress Effects into the Micromechanical Analysis of the High Strain Rate Response of Polymer Matrix Composites", Composites Part B: Engineering, Vol. 34, No. 2, 2003, pp151-165.
  • Gilat, A., Cheng, C.-S., "Modeling Torsional Split Hopkinson Bar Tests at Strain Rates above 10,000 s-1", International Journal of Plasticity, Vol. 18, No. 6, 2002, pp787-799.
  • Gilat, A., Goldberg, R.K., Roberts, G.D., "Experimental Study of Strain-Rate-Dependent Behavior of Carbon/Epoxy Composite", Composites Science and Technology, Vol. 62, No. 10-11, 2002, pp1469-1476.
  • Gilat, A., Cheng, C.-S., "Torsional Split Hopkinson Bar Tests at Strain Rates above 104 s-1", Experimental Mechanics, Vol. 40, No. 1, 2000, pp54-59.
  • Gilat, A. “Torsional Kolsky Bar Testing”, Mechanical Testing, Vol. 8, ASM Handbook, ASM International, 2000.
  • Gilat, A., Wu, X., "Plastic Deformation of 1020 Steel over a Wide Range of Strain Rates and Temperatures", International Journal of Plasticity, Vol. 13, No. 6-7, 1997, pp611-632.
  • Gilat, A., Krishna, K., "Effects of Strain Rate and Thickness on the Response of Thin Layers of Solder Loaded in Pure Shear", Journal of Electronic Packaging, Transactions of the ASME, Vol. 119, No. 2, 1997, pp81-84.
  • Staab, G.H., Gilat, A., "High Strain Rate Response of Angle-Ply Glass/Epoxy Laminates", Journal of Composite Materials, Vol. 29, No. 10, 1995, pp1308-1320.
  • Gilat, A., Wu, X., Zhang, X.T., Batra, R.C., "Dynamic Hot Forging of a Steel Connecting Rod", Journal De Physique. IV: JP, Vol. 4, No. 8, 1994, pp533-537.
  • Gilat, A., Wu, X., "Elevated Temperature Testing with the Torsional Split Hopkinson Bar", Experimental Mechanics, Vol. 34, No. 2, 1994, pp166-170.
  • Pao, Y.H., Gilat, A., "High Strain Rate Deformation and Failure of A533B Steel at Various Temperatures", Acta Metallurgica et Materialia, Vol. 40, No. 6, 1992, pp1271-1280.
  • Staab, G.H., Gilat, A., "Direct-Tension Split Hopkinson Bar for High Strain-Rate Testing", Experimental Mechanics, Vol. 31, No. 3, 1991, pp232-235.
  • Gilat, A., Tsai, J., "Application of Bodner Viscoplastic Theory to Pressure-Shear Plate Impact Experiment", Journal of Engineering Materials and Technology, Transactions of the ASME, Vol. 112, No. 1, 1990, pp52-55.
  • Pau, Y.H., Gilat, A., "Modeling 1100-O Aluminum over a Wide Range of Temperatures and Strain Rates" International Journal of Plasticity, Vol. 5, No. 2, 1989, pp183-196.
  • Gilat, A., Pau, Y.H., "High-Rate Decremental-Strain-Rate Test", Experimental Mechanics, Vol. 28, No. 3, 1988, pp322-325.
  • Gilat, A., "Modeling Plastic Deformation of Mild Steel under Nonproportional Deformation Path", Journal of Engineering Materials Technology, Transactions of the ASME, Vol. 108, No. 3, 1986, pp258-261.
  • Gilat, A., "Viscoplastic Theory with Anisotropic Hardening and its Application to Pressure-Shear Plate Impact Experiments", Journal of Applied Mechanics, Transactions of the ASME, Vol. 52, No. 3, 1985, pp629-633.

 

Dissertations and Theses: